Mikrotik

View as
Sort by
Display per page

MikroTik SFP+ SM,10km, 10G, 1310nm, LC

MikroTik S+31DLC10D, 10G SFP+ transceiver with a LC connector, 1310nm, for up to 10 kilometer Single Mode fiber connections, compatible with CCR1036-8G-2S+ and CCR1036-8G-2S+EM
1.077,79 kn
Available

MikroTik Single Mode SFP (1.25G) module, 20KM

MikroTik SFP module S-31DLC20D, a 1.25G SFP transceiver with a 1310nm Dual LC connector, for up to 20 kilometer Single Mode fiber connections, with DDM, Units are tested and compatible with CCR1072, CCR1036, CCR1016, CCR1009, CRS125, CRS226, CRS212, CRS210, CRS112, CRS109, RB3011, RB2011, RB260, RB922/921, RB953GS, hAP AC, FTC. Units are compatible with non-MikroTik SFP devices as well.
162,38 kn
Available

MikroTik small waterproof wireless access point with a built in 4G/LTE cellular modem

MikroTik LTAP Mini 4G kit (RB912R-2nD-LTm&R11e-4G), small waterproof wireless access point with a built in cellular modem that supports4G (LTE) connectivity on LTE FDD bands 3 (1800MHz), 7 (2600MHz), 20 (800MHz) and 31 (450MHz), as well as LTE TDD bands 41n (2500MHz), 42 (3500MHz) and 43 (3700MHz). Connect to the LtAP mini's built-in 802.11b/g/n wireless and access the LTE network from your phone or any other wireless device. The LtAP mini also has one 10/100 Ethernet LAN port for your wired devices. The RS232 serial port gives you console access for debugging. LtAP mini has a special enclosure with a wall mounting kit, two SIM slots to alternate between cellular providers, and integrated GPS support, External GPS antenna is available for ordering separately (not included, product code ACGPSA).
1.009,81 kn
Available

MikroTik small waterproof wireless access point with a built in 4G/LTE cellular modem

MikroTik LtAP mini LTE (RB912R-2nD-LTm&R11e-LTE), small waterproof wireless access point with a built in cellular modem that supports 2G (international version only), 3G and 4G (LTE) connectivity. Connect to the LtAP mini's built-in 802.11b/g/n wireless and access the LTE network from your phone or any other wireless device. The LtAP mini also has one 10/100 Ethernet LAN port for your wired devices. The RS232 serial port gives you console access for debugging. LtAP mini has a special enclosure with a wall mounting kit, two SIM slots to alternate between cellular providers, and integrated GPS support, External GPS antenna is available for ordering separately (not included, product code ACGPSA).
951,76 kn
Available

MikroTik SOHO 2,4ghz High Power Wireless Gigabit AP

Mikrotik RB951G-2HnD, High power 2.4GHz 1000mW 802.11b/g/n wireless Gigabit AP with antennas built in. (5)Gigabit Ethernet RJ45 Ports +(1)USB 2.0 port. Internal 2x2 MIMO PIF antennas, max gain 2.5dBi. 600Mhz Atheros AR9344-DC3A CPU, 128MB RAM. Router OS Level 4 License. Includes 14V /1A Power Adapter. Can be powered by Passive PoE: 8-30V DC on Ether1 (Non 802.3af). Dimension 113x138x29mm
567,65 kn
Available

MikroTik SOHO 2,4ghz Wireless AP

Mikrotik RB951Ui-2HnD, High Power 2,4GHz 1000mW 802.11b/g/n Wireless SOHO AP with Atheros AR9344 600MHz CPU, 128MB of RAM. It has five 10/100 Mbit/s RJ45 Ethernet ports and PoE output function for port #5, one USB 2.0 port. Includes AP in a plastic case, 24V 0.8A power adapter, Built-In 2x2 MIMO PIF antennas, max gain 2.5dBi
425,00 kn
Available

MikroTik U.fl - Nfemale pigtail cable

MikroTik ACUFL, U.fl-HIROSE - Nfemale pigtail cable for adding external antennas. Total length including connectors is 385mm
28,05 kn
Pre-order by phone

MikroTik U.fl-SMA female pigtails

MikroTik ACSMAUFL, U.fl-SMA female pigtails that can be used to connect your LTE card to an external antenna if you are using wAP R kit (there are special openings in the enclosure of the wAP R, designed for these pigtails)
55,38 kn
Currently unavailable

MikroTik Universal RB411 Indoor case

MikroTik CA411, Indoor case for RouterBOARD RB411, RB711, RB911 (three holes for Nfemale Bulkhead connectors or Swivel antennas)
67,61 kn
Pre-order by phone

MikroTik Wall Mount Kit for RB2011

MikroTik RBWMK, Wall Mount Kit for RB2011, secures your RB2011 installation by protecting the cables from unplugging, ideal for public installations such as shared server rooms, attics, accessible closets and cabinets. Fits all standard RB2011 indoor cases (models RB2011L-IN, RB2011LS-IN, RB2011UAS-IN and RB2011UAS-2HnD-IN), protects all ten Ethernet ports, SFP port and Serial port.
66,28 kn
Pre-order by phone

MikroTik Wireless 2,4 or 5GHz miniPCI card

MikroTik R52HnD, 2.4Ghz/5Ghz Dual-Band dual-chain miniPCI card. Can function in 802.11a/n or 802.11b/g/n modes. User selectable. Atheros AR9220 chipset, 2x MMCX antena connectors, TX power up to 26dBm. Output power (400mW) 25dBm. ESD protection (+/- 15 kV). Supports up to 300Mbps physical data rates and up to 200Mbps of actual user throughput on both the uplink and downlink. Related Antena not included: Mikrotik ACSWIM
366,42 kn
Pre-order by phone

MikroTik Wireless 2,4Ghz RouterBoard + 1 miniPCI slot

Mikrotik RB912UAG-2HPnD, High Power RouterBoard used to build a 2.4GHz 802.11b/g/n wireless router with an integrated high power (1000mW) 30dBm 2.4Ghz 2x2 dual chain wireless chip + an additional miniPCIe slot for a second 802.11 wireless, or 3G card. Atheros AR9342 600MHz CPU, 64MB DDR2 RAM, 64MB NAND storage, (1)10/100/1000 Mbit/s Gigabit Ethernet port, (1) MiniPCI-e slot, (1)USB 2.0 port. (2)MMCX connectors for antenas. Power Required Passive PoE-in: 8-30V DC on Ether1 (Non 802.3af). Max Power consumption 14W. Includes RouterOS Level4 License. Accessories sold seperate Indoor Case: MIK-CA411, MMCX Antena MIK-ACSWIM, Passive 24V PoE Injector MIK-HS24-2400, MIK-HC24-2400
561,36 kn
Pre-order by phone