MaxLink POE-AFA-1, MaxLink pasivna POE injector, Passive PoE injector is used to power most RouterBoards, can be used to power any device with an appropriate input power connector. PoE Injector does not meet spec IEEE 802.3af.
MaxLink MAXPI15, PoE injector - 802.3af, 48V, 0.32A, 15,4W, 1Gbit, power cord. Gigabit PoE injector with very good quality and one output POE port for powering devices supporting 802.3af with maximum power consumption up to 15,4W. The power supply is guided over 4,5 (+) and 7,8 (-) wires.
MIK-RB-POE, Mikrotik PoE injektor, Ethernet Speed: 10/100 Mbps, Low-cost passive PoE base unit for powering passive PoE devices over ethernet. Simply connect your power source to the injector, and then use an ethernet cable to connect the injector to the RouterBOARD device. Helps reducing number of wires that lead up the tower, and in other situations.
For using with RouterBOARDS that support 10-28V PoE powering, input needs to be at least 18V to accomodate any losses in cables.
Mikrotik RB-GPOE, Gigabit PoE injek. LED, The new MikroTik Gigabit PoE adapter for powering any RouterBOARD over Gigabit Ethernet. Simply connect your power source and then use an ethernet cable to connect the injector to the RouterBOARD device.
Helps reducing number of wires that lead up the tower.
For using with any RouterBOARD that supports 9-48V PoE.
Planet HPOE-1200G, 12-Port 802.3at 30w Gigabit High Power over Ethernet Injector Hub (full power - 350W), Web Management injector Hub, features both IEEE 802.3af and High Power IEEE 802.3at Power over Ethernet (PoE) that combines up to 30 Watts power output and data per port over one CAT 5E/6 Ethernet cable.
Planet POE-1200G, 12-Port Gigabit IEEE 802.3af PoE Web Management injector Hub and complies with IEEE 802.3, IEEE 802.3u, IEEE 802.3ab and IEEE 802.3af standards. With 12 10/100/1000Base-T Gigabit Ethernet ports, the POE-1200G supports full 48V DC power for any remote IEEE 802.3af powered device (PD) such as Wireless LAN Access Point, IP phone, and IP Camera. Supporting full PoE power budget of 190 Watts, the POE-1200G provides sufficient 15.4 Watts PoE power to 12 remote PD devices. Dimension 440 x 200 x 44 mm (1U height). Web management interface in which administrators can control the functions including port Enable / Disable, port priority, system configuration, and Username / Password changing and smart features for powered devices. The PoE injector Hub can automatically detect the power status of each port and show massages on its Web management interface. includes PoE Power Saving Schedule
Planet UPOE-1600G, 16-Port Gigabit 60W Ultra PoE Managed Injector Hub – max Total PoE output power up to 600W. “Data” Input Ports: 16 x RJ45. “Data + Power” Output Ports: 16 x RJ45. Dimension 440 x 300 x 44.5 mm, 1U height
Planet POE-E202, 1-Port 802.3at PoE+ to 2-Port 802.3af/at Gigabit PoE Extender designed especially for point to multipoint PoE application. The POE-E202 can obtain a maximum of 30-watt PoE power from PoE+ input port and supplies a maximum of 25-watt PoE power budget for two PoE output ports, extending both the Gigabit Ethernet Data and IEEE 802.3at/802.3af Power over Ethernet over the standard 100m (328 ft.) Cat. 5/5e/6 UTP cable to up to two 200m powered devices at the same time.
Sve cijene iskazane su u Hrvatskim Kunama i uključuju PDV. Trudimo se dati što bolji i točniji opis i sliku. Unatoč tome, ne možemo garantirati da su svi navedeni podaci i slike u potpunosti točni. Ne odgovaramo za eventualne pogreške nastale u opisu proizvoda, greške prilikom štampanja te promjene cijena.