Teltonika RUT950, low cost M2M 4G Industrial Router solution for remote management and monitoring. This is an embedded 4G Router with dual SIM card slots so you can use the SIM card in SIM slot A as your primary mobile broadband service and if the primary service is unavailable, for example the local basestation is down, then the Teltonika 4G-RUT950 can use the SIM card in SIM Slot B. The RUT950 is supplied with 2 x Cellular Antennas and 2 x WiFi antennas. The Cellular antennas can be replaced with an external high gain outdoor antenna if the router is going to be located in a position with poor network signal

Teltonika RUT240 06E000 is a compact, cost-effective and powerful industrial 2G/3G/4G/LTE modem router for professional applications. Router delivers high performance for mission-critical cellular communication. Equiped with external SIM holder and signal strength status LEDs, it ensures easy network management. External antenna connectors make it possible to attach desired antennas and to easily find the best signal location. 4G (LTE) speed up to 70 Mbps. Antena type: 2x SMA for LTE. 1 x RP-SMA. Input voltage range 9-30 VDC. download speeds 4G (LTE) – Cat 4 up to 150 Mbps, 3G – Up to 42 Mbps,

Teltonika RUT955 T033B0, LTE dual SIM router with WiFi + GNSS antenna. 4x Ethernet ports, I/O, RS232, RS485, GNSS. Router delivers high performance, mission-critical cellular communication and GPS location capabilities. RUT955 is equipped with connectivity redundancy through dual SIM failover. Standard package contains Router RUT955, Euro PSU, 2 x LTE antennas (magnetic mount, SMA male, 3 m cable) 2 x WiFi antennas (magnetic mount, RP-SMA male, 1.5 m cable), RS485 connector block I/O connector block, Ethernet cable (1.5 m)

MikroTik LtAP mini LTE (RB912R-2nD-LTm&R11e-LTE), small waterproof wireless access point with a built in cellular modem that supports 2G (international version only), 3G and 4G (LTE) connectivity. Connect to the LtAP mini's built-in 802.11b/g/n wireless and access the LTE network from your phone or any other wireless device. The LtAP mini also has one 10/100 Ethernet LAN port for your wired devices. The RS232 serial port gives you console access for debugging. LtAP mini has a special enclosure with a wall mounting kit, two SIM slots to alternate between cellular providers, and integrated GPS support, External GPS antenna is available for ordering separately (not included, product code ACGPSA).

Teltonika RUTX09, Next generation LTE-A Cat6 cellular IoT router with Dual SIM, Carrier Aggregation and Gigabit Ethernet interfaces. Rugged and powerful choice with VPN, Firewall and plenty of processing power for custom applications on OpenWrt based RutOS system. Supports LTE Cat 6 up to 300 Mbps

Teltonika TRB140 003000, Industrial LTE Cat 4 up to 150 Mbps Gateway Board TRB140 is equipped with a single Ethernet port, Digital Inputs/Outputs and micro-USB port. TRB140 is engineered to be used in an Industrial application therefore it has a wide range of software features such as SMS control, Firewall, Open VPN, IPsec, RMS and FOTA support. OpenLinux based OS. 1 x SMA for LTE Antena. 2 x Digital Input/Output (configurable). Input voltage range 9 - 30 VDC

MikroTik LTAP (RBLtAP-2HnD), Compact weatherproof wireless access point. It has high power 2.4 GHz 802.11b/g/n wireless and Gigabit Ethernet LAN port for your wired devices. The unit comes with a two miniPCIe slots, offering many expansion options. For example, you can install LTE modem of your choice for LTE backup and 5GHz interface to have dual concurrent 2.4 GHz / 5GHz AP + LTE. 3 Modem (Mini SIM) Slots. RS232 Serial Port, 1 USB port. LtAP can handle any temperature from -40 C?° to +70 C?°. Includes 24V 1.2A power adapter, 0.35m 4pin Automotive adapter cable.

MikroTIk LTAP LTE Kit (RBLtAP-2HnD&R11e-LTE) , heavy-duty 4G (LTE) wireless access point with GPS support. It has a built-in cat 4 cellular modem that supports 4G (LTE) connectivity. high power 2.4 GHz 802.11b/g/n wireless capability provides secure access to LTE network from your phone or any other wireless device with up to 150 Mbps download speed. Gigabit Ethernet LAN port for your wired devices. There are several power options – DC jack, POE-in and automotive.

Teltonika RUTX11, 4G (LTE) – Cat 6 DL up to 300 Mbps. 4 x 1 Gbit Ethernet ports. Wave-2 802.11ac Dual Band WiFi with speeds up to 867 Mbps. Dual-SIM with auto Failover, Backup WAN and other SW features, Bluetooth LE and and USB interfaces. Quad Core ARM Cortex A7 717 MHz CPU and 256 MBytes DDR3 RAM. Can support Digital signage with 8k HDTV solution

Teltonica RUTX10, Wave-2 802.11ac Dual Band WiFi with speeds up to 867 Mbps. Dual-SIM with auto Failover, Backup WAN and other SW features, Bluetooth LE and and USB interfaces. Quad Core ARM Cortex A7 717 MHz CPU and 256 MBytes DDR3 RAM. Can support Digital signage with 8k HDTV solution

Teltonika TRB141, Industrial LTE Cat 4 up to 150 Mbps IoT Gateway. TRB141 is equipped with2 x Digital inputs, 1 x Isolated input, 1 x Analog input. 1 x Digital Output, 2 x Relay outputs. TRB141 is engineered to be used in an Industrial application therefore it has a wide range of software features such as SMS control, Firewall, Open VPN, IPsec, RMS and FOTA support. OpenLinux based OS. 1 x SMA for LTE Antena. 2 x Digital Input/Output (configurable). Input voltage range 9 - 30 VDC

Teltonika TRB142, Industrial RS232 to 4G LTE Cat1 IoT gateway. Linux based advanced firmware with firewall and VPN functionality. 4G (LTE) – Cat 1 up to 10 Mbps, 3G – Up to 42 Mbps

Teltonika TRB145, Lightweight and powerful RS485 to 4G LTE Cat1 IoT gateway. 4G (LTE) – Cat 1 up to 10 Mbps, 3G – Up to 42 Mbps. ARM Cortex-A7 1.2 GHz CPU. 2 x Configurable Digital Inputs/Outputs. RS485 interface, Full Duplex (4 wires) and Half Duplex (2 wires). 1x SIM slot. 1 x SMA for LTE

MikroTIk LTAP LTE6 Kit (RBLtAP-2HnD&R11e-LTE6) , heavy-duty 4G (LTE) wireless access point with GPS support. It has a built-in cat6 cellular modem that supports 4G (LTE) connectivity. high power 2.4 GHz 802.11b/g/n wireless capability provides secure access to LTE network from your phone or any other wireless device with up to 300 Mbps download speed. Gigabit Ethernet LAN port for your wired devices. There are several power options – DC jack, POE-in and automotive.

Planet Industrial 5G NR Cellular Wireless Gateway with 5-Port 10/100/1000T. Global 5G NR (NSA/SA)/4G LTE network with dual SIM design for cellular network redundancy. Automatic failover between 5G NR and Gigabit WAN. 802.11ax and 802.11a/b/g/n/ac WiFi standards. 2 x Di/Do and 1 serial port RS485 for Modbus applications. SSL VPN and robust hybrid VPN. AP Controller, Captive portal and RADIUS. -45 to 75 degrees C operating temperature. DIN-rail and fanless design. 4 x RJ45 LAN ports, 1 x RJ45 WAN port. 4 x 5G NR Antennas, 2 x SIM card slots. 2 x 802.11ax WiFi antennas.

Teltonika TRB245 Industrial LTE Cat 4 Gateway, small and durable industrial LTE Cat 4 Gateway equipped with 2 x SMA connetors, 1 x 100mbit RJ45, RS-232 and RS-485 serial port and 2 x SIM Slots. LTE Antenna, GNMS antenna, 16pin system connector, power adapter, mounting key, ethernet cable included.

Teltonika TRB500 (TRB5000000) Industrial 5G Gateway is compact-sized and energy-efficient industrial gateway with 1 x GbE RJ45 port and 2 x configurable I/O interfaces. 5G network speeds with ultra-low latency for mission-critical infrastructures and high data throughput ensured by 4 x externall antennas with 4x4 MIMO. RutOS operating system. 1 x SIM slot. Powered by 9-30 VDC.

Teltonika RUT360 LTE CAT6 INDUSTRIAL CELLULAR ROUTER - RUT360 is an updated version of our all-time best-seller RUT240. This compact industrial cellular router offers a possibility to connect to the internet using cellular, Wi-Fi, and wired networks. RUT360 is equipped with two Ethernet interfaces, 802.11 b/g/n WiFi,and 4G LTE Cat 6 cellular module, offering data speeds up to 300 Mbps.